MTD 113-890-033 Lawn Mower Manual

The MTD 113-890-033 is a reliable lawn mower designed for efficient grass cutting with a powerful engine, adjustable cutting height, and easy maneuverability. This manual provides essential information on safety, features, operation, maintenance, and troubleshooting to ensure optimal performance.

1. Features at a Glance 2. Safety Information 3. Operation Instructions 4. Specifications 5. Maintenance 6. Troubleshooting

Features at a Glance

Key features include a powerful engine, adjustable cutting height, and a lightweight design for easy handling.

Feature	Description
Engine	Powerful 140cc engine for efficient cutting
Cutting Height Adjustment	5 adjustable heights for customized grass length
Weight	Lightweight design for easy maneuverability
Grass Bag	Large capacity grass bag for less frequent emptying
Handle	Ergonomic handle for comfortable operation

Safety Information

Always wear appropriate safety gear when operating the lawn mower. Follow all safety instructions to prevent accidents.

Keep hands and feet away from the cutting area.
Do not operate on wet grass to avoid slipping.
Inspect the mower before each use for any damage.

Operation Instructions

To operate the MTD 113-890-033, follow these steps:

Check oil and fuel levels before starting.
Adjust the cutting height as needed.
Start the engine and allow it to warm up.
Begin mowing in a straight line, overlapping each pass.

Note: Always turn off the engine before making adjustments.

Specifications

Engine Type: 140cc 4-stroke
Cutting Width: 21 inches
Cutting Height: Adjustable from 1 to 3 inches
Weight: 50 lbs
Grass Bag Capacity: 1.5 bushels
Fuel Type: Unleaded gasoline
Oil Type: SAE 30

Maintenance

Regular maintenance is essential for the longevity of your lawn mower. Follow these guidelines:

Change the oil every 50 hours of operation.
Clean or replace the air filter as needed.
Sharpen the blades at the beginning of each season.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Engine won't start	No fuel	Check fuel level and refill if necessary.
Uneven cut	Blades dull	Sharpen or replace the blades.
Excessive vibration	Loose parts	Tighten all screws and bolts.
Grass clippings not bagging	Clogged chute	Clear any debris from the chute.

Service: For further assistance, contact MTD customer service.