MTD 11A-588Q795 Lawn Mower Manual

The MTD 11A-588Q795 is a reliable lawn mower designed for efficient grass cutting and maintenance. This manual provides essential information on safety, features, operation, maintenance, and troubleshooting to ensure optimal performance of your lawn mower.

1. Features at a Glance 2. Safety Information 3. Operation Instructions 4. Specifications 5. Maintenance 6. Troubleshooting

Features at a Glance

Key components: 21-inch cutting deck, adjustable cutting height, easy-start engine, and ergonomic handle design.

Feature	Description
Cutting Deck	21-inch wide for efficient grass cutting
Adjustable Cutting Height	Allows customization of grass length
Easy-Start Engine	Reliable starting mechanism for convenience
Ergonomic Handle	Designed for comfort during operation

Safety Information

Always wear appropriate safety gear, including gloves and eye protection. Ensure the area is clear of debris before mowing.

WARNING! Keep hands and feet away from the cutting blade.

Operation Instructions

To operate the mower, follow these steps:

Check oil and fuel levels before starting.
Adjust the cutting height as needed.
Start the engine using the pull cord.
Guide the mower in a straight line for even cutting.

CAUTION! Do not operate on wet grass to avoid slipping.

Specifications

Engine Type: 140cc 4-stroke engine.
Cutting Width: 21 inches.
Cutting Heights: 1 to 3.5 inches adjustable.
Weight: 60 lbs.
Fuel Capacity: 1.5 quarts.
Deck Material: Steel.

Maintenance

Regular maintenance is essential for optimal performance. Follow these guidelines:

Change the oil every 50 hours of operation.
Sharpen the blade at least once a season.
Clean the air filter regularly.
Inspect and replace spark plugs as needed.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Engine won't start	Fuel or oil issues	Check fuel level and oil quality; refill if necessary.
Uneven cutting	Blade dull or height adjustment	Sharpen blade and adjust cutting height.
Excessive vibration	Loose parts or damaged blade	Tighten all screws and inspect blade for damage.

Service: For further assistance, contact MTD customer service.