MTD 138-663-401 Lawn Mower Manual

The MTD 138-663-401 is a reliable lawn mower designed for efficient grass cutting and maintenance. It features a powerful engine, adjustable cutting heights, and a durable build to withstand various lawn conditions. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Mower 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: Powerful engine, adjustable cutting height, ergonomic handle, grass catcher, and durable wheels.

FeatureDescription
EnginePowerful engine for efficient cutting
Cutting Height AdjustmentMultiple settings for desired grass length
Grass CatcherCollects grass clippings for a clean finish
Ergonomic HandleComfortable grip for ease of use
Durable WheelsDesigned for smooth movement on various terrains

Installation

Unpack the mower and inspect all components. Ensure the mower is assembled correctly before use.

  1. Attach the handle: Align and secure the handle to the mower body.
  2. Check oil level: Ensure the engine oil is filled to the recommended level.
  3. Fill with fuel: Use the appropriate fuel type as specified in the manual.
  4. Inspect blades: Ensure blades are sharp and securely attached.

WARNING! Always read the manual before operating the mower. Ensure all safety features are functional.

First-Time Setup

Before starting the mower, familiarize yourself with the controls and safety features.

  1. Check safety features: Ensure all guards and safety switches are in place.
  2. Adjust cutting height: Set to the desired height for your lawn type.
  3. Perform a test run: Start the mower and test its operation in a small area.

CAUTION! Always wear appropriate safety gear when operating the mower.

Specifications

Controls and Settings

Familiarize yourself with the control panel, including the throttle, choke, and start/stop switch.

Throttle: Adjusts engine speed for optimal cutting performance.

Choke: Used for starting the engine in cold conditions.

Start/Stop Switch: Controls the operation of the mower.

Connecting Devices

This section is not applicable to the lawn mower as it is a standalone device.

Operating the Mower

Follow these steps to operate the mower safely and effectively.

  1. Start the mower: Engage the choke if necessary, then pull the starter cord.
  2. Adjust throttle: Set to the desired speed for mowing.
  3. Begin mowing: Move the mower in straight lines, overlapping each pass slightly.
  4. Empty grass catcher: Regularly check and empty the grass catcher as needed.

WARNING! Do not operate the mower on wet grass or slopes greater than 15 degrees.

Maintenance

Regular maintenance is essential for optimal performance and longevity of the mower.

  1. Check oil level: Regularly inspect and change oil as needed.
  2. Sharpen blades: Keep blades sharp for clean cuts.
  3. Clean air filter: Inspect and clean or replace the air filter periodically.
  4. Inspect tires: Ensure tires are properly inflated and in good condition.

Safety Information

Always prioritize safety when operating the mower. Follow these guidelines:

Troubleshooting

SymptomPossible CauseCorrective Action
Mower won't startNo fuel or oilCheck fuel and oil levels; refill if necessary.
Uneven cuttingBlades dull or unevenSharpen or replace blades; adjust cutting height.
Excessive vibrationLoose parts or damaged bladesInspect and tighten all components; replace damaged blades.
Grass clippings not collectedClogged grass catcherEmpty and clean the grass catcher.

Reset: Refer to the manual for resetting procedures if applicable.

Service: Contact customer support for further assistance.

MTD 138-663-401 Lawn Mower Manual © - All Rights Reserved 2026