MTD 138 Lawn Mower Manual

The MTD 138 Lawn Mower is a reliable and efficient tool designed for residential lawn care. It features a powerful engine, adjustable cutting heights, and a durable design to ensure optimal performance. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Mower 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 138cc engine, adjustable cutting height, 21-inch cutting deck, rear bagger, and side discharge capabilities.

FeatureDescription
138cc EngineProvides reliable power for efficient mowing
Adjustable Cutting HeightAllows customization of grass length
21-inch Cutting DeckWide cutting path for faster mowing
Rear BaggerCollects clippings for easy disposal
Side DischargeDischarges clippings to the side for natural mulching

Installation

Unpack and inspect contents. Assemble the mower according to the manual.

  1. Attach the handle: Align and secure with provided bolts.
  2. Check oil level: Fill with recommended oil if necessary.
  3. Fill fuel tank: Use fresh gasoline for optimal performance.
  4. Inspect blades: Ensure they are sharp and free of debris.

WARNING! Always wear safety gear when handling the mower.

First-Time Setup

Power on the mower; follow the setup instructions.

  1. Adjust the cutting height: Set to desired level before starting.
  2. Check fuel and oil levels: Ensure both are adequate for operation.
  3. Test the mower: Start and run briefly to ensure proper function.

CAUTION! Ensure the area is clear of obstacles before mowing.

Specifications

Controls and Settings

Access controls on the handle for easy operation. Features include throttle control, choke, and engine start/stop.

Throttle Control: Adjusts engine speed for optimal performance.

Choke: Used for starting the engine in cold conditions.

Connecting Devices

No external devices are required for operation.

Operating the Mower

Follow these steps to operate the mower safely and efficiently.

  1. Start the mower: Engage the throttle and pull the starter cord.
  2. Begin mowing: Move at a steady pace, overlapping each pass.
  3. Adjust speed as needed: Use throttle control for different grass conditions.
  4. Stop the mower: Release the throttle to turn off the engine.

WARNING! Keep hands and feet away from the blades while operating.

Maintenance

Regular maintenance is essential for optimal performance.

  1. Check oil level regularly: Change oil every 25 hours of operation.
  2. Sharpen blades: Keep blades sharp for clean cuts.
  3. Clean air filter: Inspect and clean or replace as needed.
  4. Inspect fuel system: Ensure no leaks and clean fuel lines.

Safety Information

Read all safety instructions before operating the mower.

Troubleshooting

SymptomPossible CauseCorrective Action
Mower won't startFuel or battery issueCheck fuel level and battery charge.
Uneven cutBlades dull or height adjustmentSharpen blades and adjust cutting height.
Excessive vibrationLoose parts or damaged bladesTighten loose parts and inspect blades.
Engine overheatingLow oil or clogged air filterCheck oil level and clean air filter.

Reset: Refer to the manual for reset procedures if applicable.

MTD 138 Lawn Mower Manual © - All Rights Reserved 2026