MTD 737 Lawn Mower Manual

The MTD 737 is a reliable lawn mower designed for efficient grass cutting and maintenance. It features a powerful engine, adjustable cutting heights, and a durable design suitable for various lawn sizes. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Mower 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: Powerful engine, adjustable cutting height, easy-start mechanism, and ergonomic handle design.

FeatureDescription
EnginePowerful engine for efficient grass cutting
Cutting Height AdjustmentMultiple settings for desired grass length
Ergonomic HandleComfortable grip for extended use
Grass CatcherCollects clippings for a clean finish
Durable WheelsDesigned for smooth maneuverability

Installation

Unpack and inspect contents. Ensure all parts are included.

  1. Attach the handle: Align and secure with provided screws.
  2. Check oil level: Fill with recommended oil if necessary.
  3. Fill fuel tank: Use unleaded gasoline.
  4. Perform a safety check: Ensure all components are secure.

WARNING! Always read the manual before operating the mower.

First-Time Setup

Prepare the mower for operation by following these steps.

  1. Check fuel and oil levels before starting.
  2. Adjust cutting height according to your lawn type.
  3. Ensure the area is clear of obstacles.
  4. Start the mower following the ignition instructions.

CAUTION! Always wear appropriate safety gear when operating.

Specifications

Controls and Settings

Familiarize yourself with the mower's controls for optimal operation.

Controls: Throttle control, choke lever, and start/stop switch.

Adjustments: Cutting height lever and grass catcher attachment.

Connecting Devices

No external devices are required for operation.

  1. Ensure the mower is off before performing maintenance.
  2. Check for any loose parts before starting.

Tip: Regular maintenance ensures longevity and performance.

Operating the Mower

Follow these steps to operate your MTD 737 lawn mower.

  1. Start the mower: Engage the throttle and pull the start cord.
  2. Begin mowing: Move the mower forward, adjusting speed as necessary.
  3. Stop the mower: Release the throttle and switch off.
  4. Empty the grass catcher: Remove and dispose of clippings as needed.

WARNING! Do not operate on wet grass to avoid slipping.

Maintenance

Regular maintenance is essential for optimal performance.

  1. Check oil level regularly and change as needed.
  2. Clean the mower deck after each use.
  3. Inspect blades for sharpness and replace if dull.
  4. Store in a dry place during off-season.

Safety Information

Always prioritize safety when operating the mower.

Troubleshooting

SymptomPossible CauseCorrective Action
Mower won't startFuel or battery issueCheck fuel level and battery charge.
Uneven cuttingBlades dull or height adjustmentSharpen blades and adjust height.
Excessive vibrationLoose parts or debrisTighten loose parts and clean debris.
Grass clippings not collectedClogged catcherEmpty and clean the grass catcher.

Reset: Refer to the manual for reset instructions if applicable.

Service: Contact customer support for further assistance.

MTD 737 Lawn Mower Manual © - All Rights Reserved 2026