MTD TROY-BILT TB46 Automatic Lawn Mower Manual

The MTD TROY-BILT TB46 is a powerful automatic lawn mower designed for efficient grass cutting with ease. Featuring a 46-inch cutting deck, adjustable cutting heights, and a reliable engine, this mower is perfect for maintaining your lawn. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: 46-inch cutting deck, adjustable cutting heights, powerful engine, ergonomic controls, and easy storage options.

Installation

Unpack and inspect contents. Ensure the mower is on a flat surface.

1. Attach the handle: Follow the included instructions to securely attach the handle to the mower.
2. Check oil levels: Ensure the engine oil is at the recommended level.
3. Fill with fuel: Use the appropriate fuel type as specified in the manual.
4. Inspect blades: Ensure blades are sharp and free of debris.

WARNING! Always wear safety gear when handling the mower. Ensure all connections are secure.

First-Time Setup

Power on the mower and follow the setup instructions.

1. Adjust cutting height: Set the desired cutting height using the adjustment lever.
2. Check safety features: Ensure all safety features are functioning properly.
3. Test operation: Start the mower and perform a test run on a small area.

CAUTION! Ensure the area is clear of obstacles before mowing.

Specifications

• Cutting Width: 46 inches.
• Engine Type: Gasoline, 4-stroke.
• Power: 20 HP.
• Cutting Heights: Adjustable from 1 to 4 inches.
• Weight: Approximately 400 lbs.
• Fuel Capacity: 1.5 gallons.
• Deck Material: Steel.

Controls and Settings

Access controls via the ergonomic handle. Key controls include throttle, choke, and cutting height adjustment.

Safety Features: Engine kill switch, safety blade brake, and operator presence control.

Connecting Devices

Ensure all connections are secure before starting the mower.

1. Check fuel and oil levels before each use.
2. Inspect blades and ensure they are properly attached.
3. Connect any additional accessories as per the manual.

Tip: Always refer to the manual for specific connection instructions.

Operating the Mower

Follow these steps for safe and effective operation.

1. Start the mower: Turn the key to the start position.
2. Engage the blades: Pull the blade engagement lever.
3. Adjust speed: Use the throttle control to set the desired speed.
4. Monitor operation: Keep an eye on the mower's performance and adjust as necessary.

WARNING! Do not operate on wet grass or steep inclines.

Maintenance Features

Regular maintenance is essential for optimal performance.

1. Check oil levels regularly and change as needed.
2. Sharpen blades at least once a season.
3. Clean the mower after each use to prevent grass buildup.
4. Store in a dry place to avoid rust and damage.

Care & Cleaning

Unplug before cleaning. Use a dry cloth only; no liquids or aerosols.

CAUTION! Do not spray liquids; keep away from heat and moisture.

Regulatory Information

This mower complies with all applicable safety standards. For support, visit www.troybilt.com or contact customer service.

Troubleshooting

Reset: Refer to the manual for reset instructions if available.

Service: Contact customer service for further assistance.