MTD WHITE 960 Series Lawn Mower Manual

The MTD WHITE 960 Series Lawn Mower is designed for efficient lawn care with a powerful engine, adjustable cutting heights, and user-friendly controls. This manual provides essential information on safety, features, operation, maintenance, and troubleshooting to ensure optimal performance.

1. Features at a Glance 2. Safety Information 3. Operation Instructions 4. Specifications 5. Maintenance 6. Troubleshooting

Features at a Glance

Key features include a robust engine, multiple cutting height adjustments, and ergonomic handles for comfortable operation.

Feature	Description
Engine	Powerful 160cc engine for efficient cutting
Cutting Heights	Adjustable from 1 to 4 inches
Deck Material	Durable steel deck for longevity
Wheels	Large rear wheels for better maneuverability
Grass Bag	Easy to empty grass collection bag

Safety Information

Always wear appropriate safety gear, including gloves and eye protection. Read the manual thoroughly before operating the mower.

Keep hands and feet away from the cutting area.
Do not operate on wet grass.
Ensure the mower is in good working condition before use.

WARNING! Failure to follow safety instructions may result in serious injury.

Operation Instructions

To operate the mower, follow these steps:

Check fuel and oil levels before starting.
Adjust the cutting height as needed.
Start the engine and engage the blades.
Guide the mower in straight lines for an even cut.

CAUTION! Always turn off the engine before performing maintenance.

Specifications

Engine Type: 4-stroke, air-cooled.
Cutting Width: 21 inches.
Weight: 60 lbs.
Fuel Capacity: 1.5 quarts.
Oil Capacity: 0.5 quarts.
Warranty: 2 years limited warranty.

Maintenance

Regular maintenance is crucial for optimal performance. Follow these guidelines:

Change the oil every 25 hours of operation.
Clean or replace the air filter as needed.
Sharpen the blades at the beginning of each season.

Tip: Store the mower in a dry place to prevent rust.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Engine won't start	Fuel or battery issue	Check fuel level and battery charge.
Uneven cut	Blades dull or height adjustment	Sharpen blades and adjust cutting height.
Excessive vibration	Loose parts or damaged blades	Tighten all screws and inspect blades.

Reset: Refer to the manual for reset instructions if applicable.