MTD YARD MACHINES 500 Thru 519 Lawn Mower Manual

The MTD YARD MACHINES 500 Thru 519 series lawn mowers are designed for efficient grass cutting and maintenance. These mowers feature a powerful engine, adjustable cutting heights, and a durable build to withstand various lawn conditions. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Mower 8. Maintenance and Care 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: Powerful engine, adjustable cutting height, durable chassis, easy-start mechanism, and ergonomic handles.

Feature	Description
Engine	Powerful engine for efficient cutting
Cutting Height Adjustment	Multiple settings for desired grass length
Durable Chassis	Sturdy construction for long-lasting use
Easy-Start Mechanism	Quick start feature for user convenience
Ergonomic Handles	Comfortable grip for better control

Installation

Unpack and inspect contents. Ensure all parts are included.

Attach the handle: Align and secure the handle to the mower body.
Check oil levels: Ensure the engine oil is filled to the recommended level.
Fill fuel tank: Use the appropriate fuel type as specified in the manual.
Inspect blades: Ensure blades are sharp and properly attached.

WARNING! Always wear protective gear when handling the mower.

First-Time Setup

Power on the mower and follow the initial setup instructions.

Check safety features: Ensure all safety guards are in place.
Adjust cutting height: Set to the desired height for your lawn.
Test start: Follow the starting procedure to ensure proper operation.

CAUTION! Ensure the area is clear of obstacles before starting the mower.

Specifications

Engine Type: Gasoline-powered, 4-stroke.
Cutting Width: 21 inches.
Cutting Height: Adjustable from 1 to 4 inches.
Weight: Approximately 70 lbs.
Fuel Capacity: 1.5 gallons.
Oil Capacity: 0.5 quarts.
Warranty: 2 years limited warranty.

Controls and Settings

Access controls via the handle: throttle control, choke, and safety switch.

Throttle Control: Adjusts engine speed.

Choke: Used for starting the engine in cold conditions.

Safety Switch: Must be engaged for the mower to operate.

Connecting Devices

No external devices are required for operation.

Ensure the mower is off before performing any maintenance.
Use only manufacturer-approved parts for replacements.

Tip: Regular maintenance will prolong the life of your mower.

Operating the Mower

Follow these steps for safe operation:

Start the mower: Engage the safety switch and pull the starter cord.
Adjust speed: Use the throttle control for desired speed.
Cutting: Move the mower in straight lines for an even cut.
Stop: Release the safety switch to turn off the mower.

WARNING! Do not operate on wet grass to avoid slipping.

Maintenance and Care

Regular maintenance is essential for optimal performance.

Clean the mower after each use: Remove grass clippings and debris.
Check oil levels regularly: Change oil as per the schedule.
Inspect blades: Sharpen or replace blades as needed.
Store properly: Keep in a dry place when not in use.

CAUTION! Always disconnect the spark plug before performing maintenance.

Safety Information

Read all safety instructions before operating the mower.

Always wear protective eyewear and gloves.
Keep bystanders away while mowing.
Do not operate in inclement weather.
Follow all maintenance guidelines to ensure safety.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Mower won't start	Fuel or battery issue	Check fuel level or battery charge.
Uneven cut	Blades dull or height adjustment	Sharpen blades or adjust cutting height.
Excessive vibration	Loose parts or damaged blades	Tighten loose parts or replace blades.
Engine overheating	Low oil or blocked air filter	Check oil level and clean air filter.

Reset: Follow the manual for resetting any electronic components.

Service: For assistance, contact MTD customer service.